B&W Hitches TS35100B Tow & Stow Adjustable Drawbar – 2″ Receiver – Multiple Drop/Rise

Description

B&W Hitches 2″ Receiver Compatible Solid Steel Construction B&W Hitches TS35100B Tow & Stow Adjustable Drawbar

Get the right drop or rise every time without swapping bars. The B&W Hitches TS35100B adjustable drawbar is engineered for RV owners, toad towers, and trailer haulers who need a precise, repeatable hitch ball height across different tow vehicles or varying loads. Solid steel construction, a clean black powder-coat finish, and B&W’s reputation for overbuilt towing hardware make this a one-time purchase for most rigs.

Dial In Your Hitch Height — Without Buying a New Bar Every Time

One of the most frustrating parts of RV towing is getting the hitch ball at exactly the right height so your trailer rides level. Too much drop and your trailer nose-dives; too little and it tail-drags. The B&W TS35100B solves that with multiple adjustable positions built into a single heavy-duty bar, saving you the hassle and cost of stocking several fixed-height drawbars.

Part of B&W’s Tow & Stow product family, the TS35100B is designed for use with a standard 2-inch receiver hitch — the most common receiver size found on Class A motorhomes, Class C rigs, half-ton through heavy-duty pickup tow vehicles, and most fifth-wheel trucks running a tag hitch for a toad. If your receiver is 2 inches, this bar is sized for it.

Adjustable Drop and Rise

Multiple height positions let you level any trailer or toad without swapping hardware. Set it once per rig combo and repeat every hookup.

Solid Steel Build

Forged and machined steel construction handles the stresses of highway towing. No hollow tubing, no flex under load.

Black Powder-Coat Finish

Corrosion-resistant finish stands up to road salt, rain, and UV exposure — important for full-timers and year-round towers.

Standard 2-Inch Receiver Fit

Slides directly into any standard 2-inch receiver hitch. Compatible with Class A, Class C, pickup trucks, and SUV tow vehicles.

Part of the B&W Tow & Stow Family

B&W Hitches built their Tow & Stow line around a simple idea: a drawbar that adjusts to fit the job rather than forcing you to own a collection of fixed-height bars. The TS35100B is the drawbar component — the shank-and-head assembly that rides in the receiver and provides the ball mount platform. It is designed to be used with a separate hitch ball (sold separately), and the head accepts standard 1-1/4-inch shank balls in common sizes (1-7/8 inch, 2 inch, 2-5/16 inch diameter balls).

If you tow multiple trailers with different coupler heights, or if you switch between tow vehicles (say, a motorhome and a pickup), the adjustable design means one bar covers all your setups. Full-timers who flat-tow a dinghy vehicle especially appreciate eliminating the guesswork every time they hook up.

Why RV Owners Choose Adjustable Drawbars

• Flat-tow (dinghy/toad) setups where the dinghy’s coupler height varies from the motorhome’s receiver height
• Travel trailer and fifth-wheel tag-along hitch setups needing precise level loading
• Households with multiple tow vehicles at different receiver heights
• Seasonal towers who store and reinstall the bar and want a repeatable height each season

Fitment and Receiver Compatibility

The TS35100B is built for 2-inch x 2-inch square receivers, which are standard on:

• Class A and Class C motorhomes with a rear receiver hitch
• Half-ton, three-quarter-ton, and one-ton pickup trucks (Ford F-Series, Chevy Silverado, Ram 1500/2500/3500, GMC Sierra)
• Full-size SUVs (Chevy Tahoe/Suburban, Ford Expedition, GM Yukon)
• Minivans and crossovers equipped with a Class III or Class IV hitch

If your receiver is 1-1/4 inch (common on smaller SUVs and cars), this bar will not fit — the shank is sized for the 2-inch opening only.

Hitch Ball Not Included
The TS35100B is the drawbar only. A hitch ball must be purchased separately. The head is compatible with standard 1-1/4-inch shank hitch balls. Match your ball diameter to your trailer coupler (1-7/8 inch for lighter trailers, 2 inch for most travel trailers, 2-5/16 inch for heavier fifth-wheel tag hitches and large trailers).

Installation Overview

Installation is straightforward — no drilling, no modification. Slide the shank into your 2-inch receiver, align the pin hole, insert your receiver hitch pin and clip (hitch pin sold separately), and torque your hitch ball to the ball manufacturer’s specification. Set your drop or rise position before inserting the pin. Most installations take under five minutes.

Setup Tips for Best Results

• Always measure your trailer coupler height and tow vehicle receiver height before selecting your drop/rise position — a level trailer improves handling and reduces tongue weight transfer errors.
• Use a quality anti-seize compound on the shank if you live in a high-salt or high-humidity environment to prevent the bar from seizing in the receiver tube.
• Torque your hitch ball nut to spec every season — vibration can back off the nut over miles.
• Inspect the pin hole and locking clip before every trip. Replace a bent or worn clip immediately.

Tow Rating Reminder
Your effective tow rating is always limited by the lowest-rated component in the system — the hitch receiver, the drawbar, the hitch ball, the ball mount, or the tow vehicle’s rated capacity. Never exceed the lowest-rated component. Verify B&W’s published gross trailer weight (GTW) and tongue weight (TW) ratings for the TS35100B against your specific towing application.

Physical Specifications

Manufacturer Part Number	TS35100B
UPC	843233000009
Weight	6.3 lbs
Overall Dimensions (L x W x H)	8.75″ x 4.5″ x 3.25″
Finish	Black powder coat
Material	Solid steel

Receiver and Fitment Specs

Receiver Size	2 inch x 2 inch square
Hitch Ball Shank Acceptance	1-1/4 inch diameter shank (standard)
Compatible Ball Diameters	1-7/8″, 2″, 2-5/16″ (ball sold separately)
Hitch Class Compatibility	Class III, Class IV

In the Box

Included	Drawbar assembly (1 piece)
Hitch Ball	Not included — sold separately
Receiver Pin / Clip	Not included — sold separately
Weight Distribution Hardware	Not applicable / not included

Brand and Series

Manufacturer	B&W Hitches
Product Family	Tow & Stow
Country of Design	USA (B&W is based in Humboldt, Kansas)

Common Applications

Motorhome Dinghy Towing	Class A and Class C with rear 2″ receiver
Travel Trailer Towing	Pickup truck or SUV with 2″ receiver
Multi-Vehicle Households	Single bar fits multiple tow vehicles
Seasonal RV Use	Repeatable height position season to season

Important Information — Read Before Towing

• This drawbar is designed for 2-inch receivers only. Do not attempt to use in a 1-1/4-inch or 2-1/2-inch receiver.
• Hitch ball, receiver pin, and clip are NOT included. You must supply these components before towing.
• Always verify that your tow vehicle, receiver hitch, drawbar, and hitch ball are each rated at or above your loaded trailer weight and tongue weight before towing.
• Inspect all towing components — pin, clip, ball nut torque, and coupler latch — before every trip.
• Do not use this drawbar for weight distribution hitch (WDH) applications — it is a standard ball mount drawbar only.
• Exceeding the published gross trailer weight or tongue weight rating voids any warranty and creates a serious safety hazard.